Skip Navigation

LITS Help

Differences

This shows you the differences between two versions of the page.

vlab:ipad-iphone [2013/03/11 14:18]
smess1 created
vlab:ipad-iphone [2014/09/15 16:24] (current)
amenz2
Line 1: Line 1:
-====== VMware for iPad & iPhone ======+====== VMware Horizon for iPad & iPhone Setup and Use ====== 
 + 
 +===== OverView =====
The VMware app allows user to access Brockport's virtual lab (Vlab). The VMware app allows user to access Brockport's virtual lab (Vlab).
-Download the VMware app for iOS devices from the App Store.  +Download the VMware app for iOS devices from the App Store. 
-  - Log into the App store from your iOS device. + 
-  - Search VMware +If you are not connected to a brockport server you will need to follow the directions of setting up OpenVPN by clicking on this link: [[vpn:install:ipad|]] 
-    - {{:vlab:ios_vlab-1.png|}} + 
-  - Install VMware  +**Notes: VMware is a free App.** 
-  - Open VMware  + 
-  - When asked for the host name or IP address enter "vlab.brockport.edu" +===== External Keyboards ===== 
-    - {{:vlab:ios_vlab-2b.png|}}  +Notes: Supports iPad Keyboard Dock and Apple Wireless Keyboards (BlueTooth) 
-  - Press "Connect" + 
-  - Enter your Username (NetID) and password +1) The iPad Keyboard docks are automatically detected by VMware but to use a Wireless / BlueTooth Keyboard you must: 
-    - {{:vlab:ios_vlab-3.png|}} + 
-  - Press "Done+  * First pair the device with the IOS Device. 
-  - Choose "SUNY Brockport Virtual Lab" + 
-    - {{:vlab:ios_vlab-4.png|}} +  * Once paired make sure onscreen keyboard in split keyboard mode is turned off. 
-  - Congratulations you have successfully logged in. + 
-    - {{:vlab:ios_vlab-5.png|}}+  * To make VMware detect keyboard you tap on the screen with 3 fingers at same time or tap the keyboard button in the interface tools. 
 + 
 +  * After a Wireless/ BlueTooth keyboard is detected you cannot use the Tools or 3 finger tap to display onscreen keyboard. You must deactivate external keyboard by pressing its Eject Key. 
 + 
 + 
 +===== How to download VMware and using it with VLab ===== 
 + 
 +1) Log into the App store from your iOS device. 
 + 
 +2) Tap the Search bar and type in VMware 
 + 
 +{{:vlab:vmware_appstore.png ? 350|}} 
 + 
 +3) Now tap "FREE" to install VMware Horizon. 
 + 
 +4) Go to your iPad or iPhone's home screen and tap Horizon to open the app. 
 + 
 +5) If the app is newly installed, it will immediately prompt you to set up a server. Enter "vlab.brockport.edu" as shown where it says Server Address, then tap Add Server. 
 + 
 +{{:vlab:vmware_addserver.png ? 350|}} 
 + 
 +6) Next, enter your NetID and password where it says username and password. 
 + 
 + {{:vlab:vmware_login.png ? 350|}} 
 + 
 +7) Tap "Login". 
 + 
 +8) Tap "SUNY Brockport Virtual Lab" 
 + 
 +{{:vlab:vmware_connect.png ? 350|}} 
 + 
 +9) Congratulations: you have successfully logged in. 
 + 
 + {{:vlab:ios_vlab-5.png|}} 
 + 
 +===== Recent Connections ===== 
 + 
 +1) Once you have added a IP address / Host name you will have a Recent Connection Page, and a Servers page. 
 + 
 +2) This will save all the information you have gave in the previous steps. 
 + 
 +3) **Removal of a Recent Connection:** You can remove a Recent Connection by just holding your finger down on the one you would like to remove and click on the X button on top of it on either of the two pages mentioned in previous steps. 
 + 
 +4) You can also change the Username and WIN by going to the Server page and holding your finger down on the server you want to change. Then click edit. 
 + 
 +{{:vlab:vmwaredifphoto.png ?350|}} 
 + 
 +**Note: The server page is also how to create new connections after you create your first one. You can have more than more server on your server page.** 
 + 
 +**Note: When setting up a connection it will automatically save your user name. This way you can delete that username so that it will have to be manually put in every time.** 
 + 
 +===== How to use VMware Features ===== 
 +**Notes: This is some information on the tool bar as shown below** 
 + 
 +1) When you are already connect you will get a screen like one below. Click on the middle circle to see all the tool options available. 
 + 
 +Middle Circle: 
 + 
 +{{:vlab:vlabcir.jpg ?300|}} 
 + 
 +Tools: 
 + 
 +{{:vpn:vpntools.jpg ?300|}} 
 + 
 +2) The first tool is settings bar, brings you to a bunch of settings you can change. 
 + 
 +{{:vpn:settings.jpg ?300|}} 
 +{{:vlab:setting2.jpg ?300|}} 
 + 
 +3) The second tool is direct mouse, instead of tapping where the mouse goes this tool allows you to hold your finger down and slide mouse around. 
 + 
 +{{:vpn:secondtool.jpg ?300|}} 
 + 
 +4) The third tool is a keyboard. 
 + 
 +{{:vpn:keyboard.jpg ?300|}} 
 +{{:vlab:keyboard.png ?300|}} 
 + 
 +5) The fourth tool is the control keys. 
 + 
 +{{:vlab:fourthtool.jpg ?300|}} 
 +{{:vlab:photo3.jpg ?300|}} 
 + 
 +6) The fifth tool is to Disconnect from the VMWare Connection
 +{{:vlab:photo5-copy-6.jpg ?300|}}
 +{{:vlab:photo2.jpg ?300|}}
 +7) The last tool is just a help tool.
 
vlab/ipad-iphone.1363025930.txt.gz · Last modified: 2013/03/11 14:18 by smess1
 
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki